How Long Does A PS4 Controller Take To Charge? Frequently Answered

With its numerous features and engaging gameplay, Sony’s PS4 controller is a great choice.

It has a 1000mAh battery that extends its lifespan.

Since the battery has good power, most people have trouble determining the precise amount of time needed to charge it fully.

So, how long does a ps4 controller take to charge? When the light bar on your PS4 controller begins to blink, it needs to be charged. The total time required to charge a PS4 controller is two to three hours.

To significantly shorten the charging time, you can use a few techniques.

Continue reading for more details.

How Long Does A PS4 Controller Take To Charge?

If you don’t use it while charging, the new PS4 controller from Sony takes about two hours to fully charge.

If you continue to use the controller with the charging cable plugged in, the charging time may dramatically increase.

The PS4 controller’s charging time may vary depending on a variety of variables.

The age of the battery has the biggest impact on how long it takes to charge.

Additionally, the state of the charger and how you use the PS4 controller are important considerations.

Look at some of the additional elements that affect how long PS4 controllers take to charge.

Factors That Impact Charging

Charging times are influenced by a variety of factors.

The biggest one is how much power your controller’s batteries currently have.

If it only needs a partial charge, the controller might be finished in 60 to 90 minutes.

It might take longer to charge older controllers or those with worn-out batteries.

Charge times may also be affected by the charger.

An old cable might have trouble transmitting a sufficient charge.

Depending on their use and quality, third-party accessories may also be faster or slower.

Unless charging takes longer than three hours, I wouldn’t be too concerned.

The controller or charger may need to be repaired as a result of this.

Play With Charging Controller

Can I play PS4 controller games while my device charges? Using a controller while it’s charging might give you pause.

You wouldn’t want to hurt your controller, so this makes sense.

A PS4 controller can actually be used while it is charging.

As a result of the battery being used, the charging time may be impacted, but the battery will still charge fully while you’re having fun.

There may be an issue with the charging cable if you notice that the battery is running out while you’re charging and playing at the same time.

Change to a better cable, and the issue should be resolved.

Battery Life

Probably another question on your mind is how long a fully charged PS4 controller lasts.

A fully charged PS4 controller typically lasts four to eight hours before it runs out of power.

The average person discovers that it lasts closer to four or six hours, though you may be able to get it close to eight hours.

This is particularly true if you play games with greater intensity.

Although it makes me sad that the charge doesn’t last very long, charging the controller doesn’t take very long.

PS4 Battery And Charging Facts

Here are some interesting details about the battery in your PS4 controller.

Let me introduce you to your controller by explaining some of these facts that you might not have known.

Annual Charge

To make sure your PS4 controller works properly, you should give it at least one full charge per year.

It might have trouble connecting to your console if you don’t.

Since you constantly charge the controller to make sure it functions properly, it’s likely that you were unaware of this.

This might be a problem if you put your PS4 in storage, stopped using a particular controller for a while, or switched to another console in the previous year.

If the controller is charging, you might notice that it isn’t connecting.

If so, just wait until the controller is fully charged before attempting to use it.

Efficient Temperatures

A specific temperature range must be maintained for your controller to operate properly.

The controller may respond slowly, the battery may drain, or it may even break in extremely cold or hot conditions.

The good news is that room temperature is the most effective temperature range.

Maintaining the proper temperature for your controller shouldn’t be a problem.

When the temperature is between 10°C and 30°C, or 50°F to 86°F, it works best.

This shouldn’t ever be an issue because the majority of homes fall within this range.

Charge In Rest Mode

While the console is in rest mode, you can use it to charge your PS4 controllers.

While the default settings might prevent you from doing this, you can easily change them.

Go to Settings after starting the console.

The toolbox icon can be chosen by pressing up on the main menu.

then select Set Features Available in Rest Mode under Power Save Settings.

A menu option titled “Supply Power to USB Ports” will appear.

Check to see if this is on. This makes sure the USB ports are always active, even when the console is dormant.

Battery Failure

A battery’s capacity to maintain a charge eventually deteriorates.

So long as the battery isn’t completely replaced, the device will stop functioning.

Despite how awful this is, the good news is that PS4 controllers have a long lifespan.

A 10- to 15-year lifespan is expected for the internal battery.

That means you won’t have to be concerned about your controller breaking down any time soon.

Rest Mode Charging

By turning on the power in a USB port, you can charge your PS4 controller while it is in rest mode.

You cannot charge your controller while it is in rest mode using the default configuration.

To enable charging while in rest mode, there are a few steps you can take.

1. Go to Settings and select Power Save options.
2. Go to Rest Mode and set available features.
3. Select the Supply Power to USB Ports option.
4. Select Ok.

Thankfully, you can charge your controller while your console is sleeping.

Your PS4 gaming console’s performance and lifespan will both be greatly enhanced by doing this.

PS4 Controller Battery Time Vs. Other Controller’s Battery Time

A PS4 battery should last four to eight hours if it is in good condition, according to Sony.

The eight-hour time limit, though, is only applicable to batteries that are relatively new and haven’t been heated up while being used for gaming.

Over time, the battery life gets shorter.

A less-than-four-hour battery timing may even be possible with an older battery.

So, the battery’s timing is entirely dependent on how long it lasts and how you use it.

What Ails A PS4 Controller’s Battery Life?

By pressing and holding the PS button on your PS4 controller, you can quickly determine whether the battery is low.

The battery level will be displayed on your screen.

When your battery is nearly empty, the console also displays warnings on your gaming display.

Your PS4 controller won’t be able to send an input alert to the console if you ignored the low battery warning on your display, and it might even turn off.

The light bar on your PS4 controller will also stop emitting light until the controller is plugged into the console.

Your PS4 controller must be immediately connected to a USB port in order to be charged after the console alerts you that it is running low on battery.

While your PS4 controller is charging, you can still play games.

Is It Safe To Charge A Playstation 4 Controller While Playing?

Yes, charging your PS4 controller while playing games is completely safe.

You can use the controller while plugged in without any issues.

However, it lengthens the charging time and shortens the battery’s lifespan.

As a result, we urge you to charge the battery whenever you aren’t using it.

There are a few considerations to make when playing games and charging your controller simultaneously.

1. Make sure there is adequate ventilation where you are using the controller because a lack of ventilation causes overheating and hastens the depreciation of batteries.
2. Try not to overcharge your controller. Li-Ion batteries are easily damaged even with a slight overcharge, despite Sony’s claims that it automatically stops the charging.

While using the controller while it is being charged is not recommended, if you must do so for some reason, make sure to follow the advice we have provided above.

What Causes A PS4 Controller Battery To Degrade So Quickly?

There are a number of built-in features in the PS4 controller that contribute to its short battery life.

It consists of the speakers, vibration motors, light bar, and a default setting that are always on when the console is on.

The battery life is greatly reduced by these factors, which also have an impact on other factors.

To extend the life of your battery, you can implement some fixes.

Disable The Default Always-on Setting

To turn off the Always-On setting by default, follow these instructions.

1. Press the PS button.
2. Select Customization options.
3. Select Switch Off your Choice of PS4 controller.
4. Select Ok.

Replace The Battery With A Stronger One

It’s likely that the battery in your PS4 controller has reached the end of its useful life if you’ve used it for a while.

The use of a more recent and improved battery is the only remedy for this.

To replace the battery in your PS4 controller, follow these steps.

1. Pinch the left and right handles together to create an opening, then use a plastic opening tool to slide the opening upward.
2. To open the casing, pull down on the crack next to the share and options buttons.
3. Remove the motherboard ribbon from the controller’s two sides.
4. The battery plugs can be gently removed using the forceps plug.
5. Use a similar procedure to install the new battery.

How Long Will A Dead PS4 Controller Take To Charge?

The amount of time it takes to charge a controller typically depends on the battery level and the method used to charge it.

It will take approximately 2 hours to fully recharge the controller battery if it is completely discharged and you are using a 4W, 5V charger or the USB port on the PS4.

Simply turn off the speaker and vibration to charge it even more quickly while in use.

Next, you might wonder if you can use the controller while it charges and how long it will take to charge.

Can A PS4 Controller Be Used While Charging?

When your PS4 controller is charging, you can use it. If you use your controller in this manner, there are a few things to remember.

1. Make sure you are using the controller in a location where it can get enough ventilation. The controller may become overheated if it is kept in a small area while charging, which will speed up the battery’s deterioration.
2. Avoid overcharging your controller because, despite SOny’s claim that there are mechanisms in place to prevent it, even slight overcharging of a Li-Ion battery can cause battery damage.

Knowing how long it takes to charge a controller, you can now try to speed up the process to reduce the amount of time it takes.

How Can I Quick Charge The Ps4 Controller?

A fully charged controller is essential if you play PS4 games, as you are aware. However, at times it can be annoying to wait for your controller to charge. In light of this, I’m going to try to find a way to hasten the charging of PS4 controllers.

While the controller unit is charging, the standard PS4 USB port supplies 5V, 800mA. That will allow the PS4 controller to slowly charge. But there are some ways to speed up the charging process:

Use A Wall Charger/socket

Your PS4 controllers can be charged pretty successfully by using a high-wattage power brick with a similar voltage rating of 5V (but a higher current rating) that you’d typically use to charge your high-end phones.

That’s because they can deliver sufficient power to help your controller batteries charge more quickly. In contrast to the PS4 USB port, a 10W or 12W power brick will charge your PS4 controller more quickly.

However, if at all possible, I’d advise against using fast chargers. Fast chargers with voltage ratings higher than 5V run the risk of permanently damaging the controller’s battery, which will reduce their ability to charge devices.

Use A Charging Dock

You can charge two or more controllers at once with a PS4 charging dock, which reduces the overall charging time. Two PS4 DualShock controllers can be fully charged in about 2.5 hours using a typical, inexpensive charging dock.

Better results can be achieved with a charging dock. For instance, the OIVO PS4 Controller Charging Dock charges your controllers in just 1.8 hours.

The controllers must be removed after they have been fully charged, and you must take care of the charging process. There is no need to test Sony’s assertion that the controller batteries stop charging once they are fully charged by overcharging your controllers and endangering the batteries’ health.

Some charging stations include an indicator screen or lights, as OIVO previously mentioned, to display the battery status while charging. Purchase one that can tell you when your controller has been fully charged.

Let’s move on to how to tell when your PS4 controller needs a charge and is quickly losing power.

What Does A Flashing White Light Mean For Your Ps4 Controller’s Battery?

Your controller’s flashing white light may indicate that the battery is almost empty.

Have you ever wondered what a white light on your PS4 controller meant when it started to flash? Rest assured that you are not alone.

Your DualShock controller’s white light might start flashing for one of two reasons.

1. The controller battery is low and going to die out soon
2. The controller is failing to connect to the PS4

Let’s find out more specifics about them.

1. Low Battery

Low battery warning is the most frequent cause of the white light on a PS4 controller flashing.

Quick Fix:

• The white light will stop flashing if you simply charge the controller before using it again.

1. Hardware/Software Or Connectivity

If there is a problem with the hardware or software and your controller cannot connect to the PS4, a white light will begin to flash on it.

Quick Fix:

• Look over the USB connections and cables. The white controller light might begin to flash if the USB cables are broken. The USB cables must then be changed as the only solution.
• If there is a problem with your console, starting the PS4 in safe mode may also help you connect the controller properly and stop the flashing white light. The database must be rebuilt in order for the console to build a fresh database of all the drivers.
• Resetting the controller can solve some software problems with it. Here’s how to do it:
  • Holding down the power button will turn the PS4 off.
  • The reset button can be found on the controller’s reverse side, close to the top right screw.
  • Press and hold the reset button down through that hole for at least five seconds using a hairpin or sim card ejector tool.
  • Reconnect the controller to your PS4 by turning it on now.

The most common cause of a flashing white light is a low controller battery. Due to the PS4 controller’s limited battery capacity, we are unable to do much, such as replace it with a larger battery. Or can we?

Let’s learn more about it in the section after this one.

Can A Larger Battery Fit Inside A Ps4 Controller?

Have you ever noticed how the battery on your PS4 controller depletes SO quickly? like, quickly within three to four hours? Yeah, me too.

And not just our controllers are impacted; this problem exists with all PS4 controllers. It seems like Sony overlooked including a sizable battery in them.

What can we do to address this then? I did some research and discovered that DualShock 4 controller internal batteries can be changed.

The process is more difficult and requires some level of expertise, which is a drawback. You may also void your controller warranty by changing a regular battery.

Here’s how to go about it.

Choose The Correct Battery Pack

The technical portion is about to begin. A 1000mAh lithium-polymer (LiPo) battery powers the DualShock controller at 3.7V. The market offers a wide variety of battery packs with capacities ranging from 1000mAh to 2000mAh. Any battery that is currently on the market can be used to swap out the original.

Also, be sure to use the right kind of connector with the battery. The connector pins on the 2015 DualShock and earlier models differ from those on the more recent models.

For your convenience, models from 2015 and earlier have model numbers that end in ZCT1U. The model numbers of the more recent controllers end in ZCT2U.

Replace The Battery

Now all you have to do is open the controller and swap out the old battery pack for the new one.

1. Remove the screws from the controller’s back and carefully detach the chassis.
2. Avoid damaging anything, especially the ribbon cable. Remove it, and then disconnect the battery connectors.
3. Now remove the old battery and install the new one. Make sure the battery connectors are inserted correctly the first time.
4. Prior to turning it on and coupling it with your PS4, reassemble all the components and reset the controller.

Use of a larger battery pack will nullify all of Sony’s warranty claims because the manufacturer didn’t intend for you to replace this battery on your own. Replace the battery with a larger one only when the older one has broken down or stopped functioning altogether to make sure you don’t lose out on this upgrade.

POWTREE has created a fantastic battery pack replacement kit. Your PS4 controller’s charge time will double thanks to this 2000mAh battery. Please note that these batteries are NOT compatible with the first generation PS4 controllers, model numbers CUH-ZCT1E, CUH-ZCT1H, CUH-ZCT1H/B, CUH-ZCT1H/R, and CUH-ZCT1U.

Final Words

After its battery is completely depleted, a PS4 controller takes about two hours to fully recharge.

However, I hope you now know much more than just how long it takes to charge! Additionally, you are aware of how long it ought to last, how to lengthen the battery life, and even the reason why your PS4 controller doesn’t seem to be retaining a charge as it ought to.

Now that your Playstation 4 controller is fully charged, you can resume playing your favorite game!

I appreciate you reading.